Your shopping cart is empty!
Enclosure for 1x M.2 NVMe & SATA SSD with USB Type-C interface
Portable
Handy in size, great in performance: either an NVMe or a SATA SSD can be quickly and easily installed and taken along in the external USB 3.1 (Gen 2) Type-C enclosure IB-1817MC-C31. Access to M.2 SSDs with a capacity of up to 2 TB is possible, no matter which host you connect it to.
More possibilities
The USB protocol version 3.1 (Gen 2) achieves twice the data speed with 10 Gbit/s compared to the lower USB version. A special feature of this external enclosure is the combination of SATA and NVMe. Finally, both technologies can be operated in one enclosure
Perfect cooling
This enclosure features three cooling characteristics: the cooling fin design of the aluminium enclosure, the silicone thermal pad that is applied to the data carrier and the heat sink that covers both inside. In this way, heat generated by the high performance of the enclosure is optimally dissipated.
Click - Safe
Anyone who decides on a great enclosure with a high data capacity also wants their data to be well secured. Therefore, the IB-1817MC-C31 is equipped with a write protection function. With a small tool supplied, a switch is flipped between write-protected and unsecured.
- High-grade aluminium in innovative cooling fin design
- Interface to host computer: USB 3.1 (Gen 2) Type-C & Type-A, up to 10 Gbit/s
- Supports PCIe 3.0 x2 and SATA III
- M-Key socket for 22x 30/42/60/80 mm
- With additional patented heatsink and thermal pad inside
- Activation of write protection via switch
- LED for power and access
- Supports Windows, macOS
- Colour: Grey
- Material: Aluminium
- Interface to host computer: USB 3.1 (Gen 2) Type-C
- Transfer rate: Up to 10 Gbit/s
- Length of cable: 20 cm
- Socket: M-Key
- M.2 card size: 22x 30/42/60/80 mm
- M.2 interface: PCIe x2 / SATA III
- SSD capacity: Up to 2 TB
- Plug & Play: Yes
- Cooling: Passive
- LED: Power, access and write protection status
- Chipset: RTL9210B
- Power supply: Bus-powered
- Operating system: Windows, macOS
- System requirements: One free USB 3.1 (Gen 2) Type-C or Type-A port on your host computer
Packing content:
- 1x IB-1817MC-C31 (drive not included)
- 1x Type-C to Type-C cable (20 cm)
- 1x Type-C to Type-A cable (20 cm)
- 1x Silicone thermal pad
- 1x Heat sink
- 1x Tool for write protection switch
- 1x Screw driver
- 1x Set of screws
- 1x Quick installation guide
